The circuit overloads usually occur because of the electrical demand that is on the same breaker from too many devices or a faulty wiring.
If you remove an appliance or a higher wattage lightbulb you can test the breaker.
Otherwise, you are free to contact a professional help from US Electric for instance, in order to inspect the breaker and check for wiring faults or damage.
100 THINGS TO KNOW ABOUT GPS AND FLEET MANAGEMENT
Hey! I'm George J. Magoci and I will send you a FREE eBook where you can learn 100 Things To Know About GPS and Fleet Management.
5. Extension Cord Patches
Any cable or wire wrapped in electrical tape with an exposed wiring or insulation fraying is known as a hazard.
Normally, these cables need replacement and it can be done in two ways:
- remove the frayed and damaged ends and replace the plug
- replace the entire cable
A wiring system can work forever, however, if it is disturbed or altered, there is a high potential for trouble.
Running an extension cord creates an additional problem where there is a possibility of cords kinking. This will lead to tripped breakers, damaged outlets, or in the worst case, a fire.
